|9d Hifu With Vaginal Hifu
7D HIFU Slimming Machine,
Cold Line Ultrasound HIFU Machine,
240V HIFU Face Lifting Machine
Cryo-HIFU is a combination of advanced semiconductor refrigeration + high-intensity focused ultrasound (HIFU) technology. With the innovative introduction of freezing point, it can effectively reduce the risk of tissue or epidermis being easily "burned", making the efficacy safer and more comfortable. Frozen HIFU makes up for the restricted area of single-row/multi-row fixed-point operation with a sliding operation method, and its painless and fast characteristics are very popular. A new breakthrough in comfort and depth. It provides 9 different depths (1.5mm/2.0mm/3.0mm/4.5mm/6.0mm/8.0mm/10mm/13mm/16mm) of replaceable treatment probes. It emits "two" or "four" energy points at the same time, and the respective focal points of the emitted ultrasonic waves are formed at different positions, the action area is wider, and the operation speed is faster, which is 2-4 times faster than traditional HIFU. Freezing HIFU Compared with the traditional single ultrasonic technology instrument, it can achieve the ideal effect of customization.
Frozen HIFU is a novel and safe and effective cosmetic method to treat facial skin aging and sagging, as well as to treat obesity and sagging. Provides deep penetration and truly long-lasting results without damaging the skin's surface while ensuring skin comfort
Instrument technology advantages
Frozen HIFU uses ultrasonic energy to penetrate deeply into the fat layer (16mm/13mm/10mm/8.0mm/6.0mm), the fascia layer (4.5mm), the dermis and the epidermis (3.0mm) through the use of treatment probes with different depth devices. /2.0mm/1.5mm), the HIFU cooling system reduces the surface temperature of the probe to 1~5℃, the epidermis is cooled and protected, and at the same time, the ultrasonic wave is precisely focused on the specific target of the subcutaneous tissue. Invasively generate two or four thermal freezing points, and generate a thermal effect of 65 ° C ~ 70 ° C in the subcutaneous tissue layer, then crush and dissolve fat cells, and stimulate collagen regeneration and fascia shrink immediately, thereby effectively improving and firming the skin. Multi-effects such as fat dissolving and body sculpting
The main function
AThe main function
Anti-wrinkle, anti-aging, lifting, firming.
1. Facial anti-aging and anti-wrinkle: deep wrinkles, folds, forehead lines, nasolabial groove lifting, lip wrinkles, brow wrinkles, etc.;
2. Neck anti-wrinkle: tighten neck skin, improve double chin, thin face
3. Anti-wrinkle around the eyes: wrinkles around the eyes, crow's feet at the corners of the eyes, bags under the eyes, tightening the loose skin around the eyes;
4. Whole body anti-aging: Tighten the back, adjust the chest, shape the waist and abdomen, shape the buttocks, shape the legs, remove the butterfly sleeves, and repair the light.
Principle of Instrument
Ultrasound focus uses its unique high-energy focused ultrasound to reach the SMAS layer, enhances the SMAS fascia suspension, and comprehensively solves the problem of facial sagging and relaxation. The energy of the ultrasonic wave is accurately positioned on the subcutaneous 4.5mm fascia layer to play the role of sarcolemmal muscle growth and stretching to achieve the best effect of shaping, lifting and firming. It acts on the subcutaneous 3mm collagen layer to regenerate collagen and achieve aging problems such as skin rejuvenation, whitening, wrinkle removal, and pore shrinkage. At the same time, the energy is transmitted through the epidermis, so there is no need to worry about damaging the epidermis, and the skin can also be quickly lifted, firmed, and smoothed quickly!
Frozen HIFU Instrument
Semiconductor refrigeration + ultrasonic (HIFU) technology
Water cooling system, cooling up to 1℃～5℃
0.5 J/cm2 to 100 J/cm2
Insert the handle cord into the socket on the back of the machine and fix the screws, then plug the power cord into the back power socket
The power supply line is suitable for the voltage within the normal working range of the instrument. The installation of the probe is shown in the figure below.
Operation of the instrument
1. After receiving the instrument, unpack the package and connect the power cord. 2. Connect the treatment handle. When connecting, note that the red dot on the handle line corresponds to the red dot on the meter, just plug it in. If the connection is not in place, the instrument will alarm. 3. Activate the power switch on the rear of the instrument
4. Then install the therapy probe on the therapy handle (the handle should be installed upwards to prevent the therapy probe from falling on the ground and damage)
5. Enter the operation interface and click anywhere on the screen to enter the preparation interface
Instrument common fault problems:
1. There is no display on the instrument interface, please check whether the power plug is not connected or the power switch is turned on. 2. The instrument is normal but there is no energy output or the alarm keeps on turning on. Please check
whether the connection between the handle wire
and the host is firm or whether the probe is installed in place.
Maintenance and care of the instrument
1. After using the instrument, please disinfect it with alcohol or normal saline, wipe it clean and keep it properly.
2. Before use, a plug with a grounding pin must be used, and ensure that the power socket of the instrument is truly grounded.
3. The voltage of the instrument is suitable. If the local power supply voltage is unstable, we recommend that the user add a regulated power supply with matching power.
4. For the therapeutic effect of the instrument and to ensure normal service life, please use the designated accessories provided or recommended by the original manufacturer.
5. Do not place it in a humid place or near a water source, and do not expose the instrument to direct sunlight.
6. The instrument is close to a strong heat source, because this may affect the life and normal use of the instrument.
7. Please remove all metal objects on your body first, so as to avoid unforeseen situations that may affect the curative effect.
8. Avoid bad contact. Please pay attention to the place where the skin is in contact with a certain degree of moisture. Wipe it with water-based products or water to achieve the desired effect.
9. Please turn off the power switch of the instrument when the instrument is not in use, and ensure that the main power of the instrument is turned off before use to ensure the safety of electrical products.
10. Strictly follow the instructions in the user manual to use the instrument or train the operator of the instrument.
Contact Person: Admine